We use the traditional hand wipe methods to retin your copper cookware, which is far superior than dipping or electro plating.

The retinning process:

1) The item is put in a degreasing tank for 12-24 hours depending on the amount of grease and carbon build up.

2) The item is then thoroughly washed

3) The item is then reshaped to its original form, dents are hammered out, rivets tightened and the bottom flattened.

4) The item is then put in pickling acid for approximately 12 hours for a deep clean.

5) The item is then washed thoroughly and dried.

6) A masking coat is painted on the outside of the pan to stop any unwanted tin bonding on the outside.

7) Flux is then applied, heated to a high temperature, pure tin ingot is then applied and hand wiped, once the tin smith is happy with the coating it is then left to cool.

8) Finally the item is deep cleaned inside and out and can be used with no need for further washing.